Product ID:PT-107,FUNGUS RESISTANT,AIR DRY, CLEAR VARNISH
MSDS Date:05/06/1991
FSC:5970
NIIN:00-832-6950
MSDS Number: BTTHY

PRODUCTS/TECHNIQUES INC

3271 SO. RIVERSIDE AVE.
RIALTO, CA 92316
US

Emergency Phone: 909-877-3951,800-424-9300(CHEMTREC)

Info Phone: 909-877-3951

Preparer: STEPHEN JABS

Cage: 06341

PRODUCTS/TECHNIQUES INC

RIALTO, CA 92376 US

Telephone: 909-877-3951

Cage: 06341

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 9.18%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

SALICYLANILIDE

CAS: 87-17-2

RTECS: VN7850000

Fraction By Weight: 4.06%

TUNG OIL

CAS: 8001-20-5

Fraction By Weight: 31.99%

ADDITIVE (CONTAINS XYLENE) (SARA III)

Fraction By Weight: 0.36%

OSHA PEL 100 PPM, 150 STEL

ACGIH TLV: 100 PPM/150STEL 9394

ADDITIVE (NON-HAZARDOUS)

Fraction By Weight: 0.36%

PHENOLIC RESIN

CAS: 27553-53-3

Fraction By Weight: 26.17%

MINERAL SPIRITS

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 18.30%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM; 9394

2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA) (SARA

CAS: 111-15-9

RTECS: KK8225000

Fraction By Weight: 3.92%

OSHA PEL S,100 PPM

ACGIH TLV: S, 5 PPM; 9394

N-PROPANOL

CAS: 71-23-8

RTECS: UH8225000

Fraction By Weight: 3.92%

OSHA PEL 200 PPM/250 STEL

ACGIH TLV: S,200PPM/250STEL9394

COBALT DRIER (SARA III)

Fraction By Weight: 0.34%

OSHA PEL 0.05 PPM CO

ACGIH TLV: 0.05 PPM CO 9394

ZIRCONIUM DRIER

CAS: 22464-99-9

Fraction By Weight: 0.66%

OSHA PEL 5 PPM ZR

ACGIH TLV: 5 PPM ZR 9394

ADDITIVE (NON-HAZARDOUS)

CAS: 96-29-7

Fraction By Weight: 0.66%

VOLATILE ORGANIC COMPOUND CONTENT (350 GMS/LITER)

RTECS: 9999999VO

INGREDIENTS OF PROPELLANT FOR AEROSOL ARE INGREDIENT

RTECS: 9999999ZZ

PROPANE (PROPELLANT)

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 22%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9394

ACTTONE

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 73%

OSHA PEL 750 PPM

ACGIH TLV: 750 PPM 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ETHYL-3-ETHOXYPROPIONATE

CAS: 763-69-9

RTECS: UF3325000

Fraction By Weight: 6%

VOLATILE ORGANIC COMPOUNDS

RTECS: 9999999VO

Fraction By Weight: 100%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: STINGING, TEARING,
REDNESS, SWELLING, DAMAGE. SKIN: REDNESS, BURNING, DRYING,
CRACKING. INHALATION: HEADACHE, DIZZINESS, LOSS OF COORDINATION,
FATIGUE. INGESTION: NONE SPECIFIED. CHRONIC: PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE. INTENTINAL MISUSE BY CONCENTRATING AND
INHALING MAY BE HARMFUL OR FATAL.
Explanation of Carcinogenicity:CONTAINS 2-ETHOXYETHYL ACETATE KNOWN IN
CALIFORNIA TO CAUSE CANCER OR REPRODUCTIVE TOXICITY.
Effects of Overexposure:EYES: STINGING, TEARING, REDNESS, SWELLING,
DAMAGE. SKIN: REDNESS, BURNING, CRACKING. INHALATION: HEADACHE,
DROWSINESS, DIZZINESS, LOSS OF COORDINATION, FATIGUE, DEATH.
INGESTION: NONE SPECIFIED BY MA NUFACTURER.
Medical Cond Aggravated by Exposure:PRE-EXISTING MEDICAL CONDITIONS MAY
BE AGGRAVATED BY USE OF THIS PRODUCT. TWO COMMON CONDITIONS THAT
MAY BE AGGRAVATE BY THIS PRODUCT ARE DERMATITIS AND ASTHMA.

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. GET MEDICAL
ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH AREA WITH SOAP
AND WATER. IF IRRITATION DEVELOPS, GET MEDICAL ATTENTION.
INHALATION: MOVE TO FR ESH AIR. IF NOT BREATHING, GIVE CPR.
IFBREATHING DIFFICULT, GIVE OXYGEN. GET MEDICAL ATTENTION.
INGESTION: GET MEDICAL ATTENTION.

Flash Point Method:TCC
Flash Point:24.0F,-4.4C
Lower Limits:0.9
Upper Limits:13.7
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, UNIVERSAL TYPE FOAM.
Fire Fighting Procedures:WEAR PROTECTIVE EQUIPMENT INCLUDING
RESPIRATORY PROTECTION. MOVE CONTAINERS FROM FIRE AREA. USE WATER
SPRAY TO COOL FIRE EXPOSED CONTAINERS AND DISPERSE VAPORS.
Unusual Fire/Explosion Hazard:VAPORS,HEAVIER THAN AIR, MAY TRAVEL TO
DISTANT IGNITION SOURCES AAND FLASHBACK OR EXPLODE; MAY CREATE
VAPOR/AIR EXPLOSION HAZARD INDOORS,OUTDOORS,OR IN SEWERS.

Spill Release Procedures:KEEP ALL SOURCES OF IGNITION AND HOT METAL
SURFACES AWAY FROM SPILL. WEAR APPROPRIATE PROTECTIVE EQUIPMENT.
DIKE SPILL WITH ABSORBENT AND PUMP OR ABSORB AND SCOOP MATERIAL
INTO CONTAINERS FOR PROPER D ISPOSAL OR REUSE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE AND STORE THIS MATERIAL IN COOL,
DRY, WELL VENTILATED AREA AWAY FROM HEAT, DIRECT SUNLIGHT, HOT
METAL SURFACES AND IGNITION SOURCES.
Other Precautions:POST AREA "NO SMOKING OR OPEN FLAME". BOND AND GROUND
ALL EQUIPMENT WHEN TRANSFERRING FROM ONE VESSEL TO ANOTHER. PROTECT
CONTAINERS FROM PHYSICAL DAMAGE. USE OF EXPLOSIVE-PROOF EQUIPMENT
IS RECOMMEND ED. KEEP CONTAINERS CLOSED.

Respiratory Protection:WHEN CONCENTRATIONS EXCEED EXPOSURE LIMITS, USE
A NIOSH APPROVED RESPIRATOR OR GAS MASK WITH NIOSH APPROVED
CARTRIDGES OR CANNISTERS, OR NIOSH APPROVED SUPPLIED AIR EQUIPMENT.
Ventilation:PROVIDE ADEQUATE MECHANICAL (GENERAL) AND LOCAL EXHAUST TO
MAINTAIN AIRBORNE CONCENTRATIONS BELOW ESTABLISHED LIMITS.
Protective Gloves:USE GLOVES IMPERMEABLE TO THE PRODUCT.
Eye Protection:EYE PROTECTION IS RECOMMENDED.
Other Protective Equipment:PROVIDE AN EYE WASH STATION AND SAFETY
SHOWER. IMPERVIOUS CLOTHING AND SHOES SHOULD BE WORN.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EMPTY CONTAINERS RETAIN RESIDUE LIQUID AND VAPORS AND CAN BE DANGEROUS.
DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR
EXPOSE TO HEAT, FLAME, SPARKS, OTHER IGNITION SOURCES; THEY MAY EX
PLODE AND CAUSE INJURY OR DEATH.

HCC:V3
Boiling Pt:B.P. Text:175 TO 395F
Vapor Density:>1
Spec Gravity:0.92
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Appearance and Odor:CLEAR VARNISH
Percent Volatiles by Volume:40.32

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES, OXIDIZERS, AND SELECTED AMINES.
Stability Condition to Avoid:AVOID ALL POSSIBLE SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE. OTHER
KNOWN HAZARDOUS PRODUCTS ARE POSSIBLE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. EMPTY CONTAINERS SHOULD BE COMPLETELY
DRAINED, RINSED, AND PROPERLY DISPOSE OF IN AN ENVIRONMENTALLY SAFE
MANNER AND IN ACCORD ANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.